Delivers Tricks Atmosphere Concert in the Car

In many of the problems of our vehicle staging and imaging and its applications. In fact, what is the upgrade? Imaging what is it? Lets peel this article.

Note: The purpose of this article is for the day-to-day staging and imaging context, rather than in the situation of the game and others.

Installments can be defined as the musicians, such as playing music, the concert stage, in the studio, in the bar, restaurant and others.

There are organized by the derivation of the high stage (stage height) of the stage (the width of the first stage), the width and depth of the stage (the first stage of depth).

The bottom line is dependent on where he recorded the acoustic conditions (environment), and also affect the recorded sound reproduction stage.

Many systems have the ability to produce a good tonal accuracy, but was unable to reproduce the recorded Atmosphere. What causes it?

Acoustics. The sound produced when the sound effects are very large role in reproduction for example, to record a song 35 choir at Westminster Abbey girls who physically stage is 45 meters wide, 15 meters high and the stage, and the stage depth range from treble to alto until nine meters behind the front and from the Cathedral recording microphone, about six feet.

This will be difficult to completely copy automobile pillar pillar distance of only one meter wide, 1.4 meters high, it is only 0.4 meters.

Therefore, require careful planning and the use of quality tools to reproduce close to the original state.

The image is the location of a singer on the stage is clear and specific examples of lead singer bridesmaid on the left, on the right side of the organ. Therefore, the content of the images we hear the sound on the stage.

Here, it is clear staging and imaging intertwined, which is why often tend to be parallel.

So, what you can do is copy the installation and setup, carefully proportion. In normal circumstances, the help of a state-of-the-art installation techniques, audio equipment, accurate positioning and fishing, cutting the X-OVER, supplemented by special equalizer and DSP (digital sound processor), upgrade and imaging is copied at least close although it does not have a perfect 100% of the original sound. This is what I was surprised installed in Indonesia skills. Because it tends to be limited to achieve sufficient condition.

Therefore, how to staging and imaging is a step by step? Here are some tips that you can do :

1. Additional damper in the first floor, doors, ceilings, hood, fender and dashboard. Do so careful of road noise, engine noise and mechanical noise as low as possible, you can reduce.

2. Select the dashboard of a car with the wide and flat contour, as much as possible single cabin type MPV or SUV, such as (but not necessarily sedan not only challenges greater). Point supported the ideal choice for column column width and depth of the positioning and angling ideal dashboard.

3. Installation and setup experience in the installation program, and are willing and have enough patience to do a comprehensive set carefully on this project.

4. Select competent units, power supply, speaker, including the processor, distortion and noise is as small as possible, so the results are more predictable.

5. Installed in the adjacent position in the low-frequency speaker, midrange, tweeter, speaker placement, and try the differences between the different path length thin left and right speakers. In some cars, I see, use baffle expected. However, the ideal platform for high-mounted tweeters should be ear height. For this experiment is the key!

6. Often audition live concert and recording livenya CD comparison.

7. Set tonal balance (on this issue will be discussed in a special tone balanced article), the first not to rush to catch up with the staging and imaging. I believe that a balanced tonal balance, and will help to generate accurate staging and imaging. If using the formula the number of bands, in order to the independent channels, and then use equation to solve this problem, at certain frequencies, either peak or dip.

8. Either passive or active set of cross-experiment plans, using the optimal cut point, according to the specifications of the speakers. Special attention should be different speaker brands and series.

9. Use time calibration (If you are using a processor), a serious, careful measurements, and try in the focus of a stable intermediate stage. One listening position to focus on the position of the seat or two seats (double the listening position balanced sound sounded.

10. Write down all of the process and repeat when there is a deficiency in the process.

Also do not forget that the ideal staging and imaging is the unmoved sound strange, phasey and artificial. He should create a strong impression of the stage and the whole image. So good luck, good luck.

Related Posts by Categories